How to Unlock a Safe Without a Key

It is always recommended to keep your valuable belongings into your safe. When you do put your precious materials inside a safe or put your guns inside a gun safe, you ensure that the items are stored safely. You also lower the risk of the things getting stolen if any burglar does break into your house.

Apart from that, you will also be able to store your important documents inside them securely. But, what if you lose your key that is required to open the door of the safe? Well, we are here to show you how to unlock a safe without a key, which means you will not have to worry that much if you did lose it.

Ways to Get Your Safe Unlocked Without a Key

As it goes with all the types of gun safes, they will be quite challenging to get access to without using a key. Nevertheless, bypassing the locking mechanism is not an impossible task at all. With that said, these are the methods that you should follow to get your safe unlocked without a key:

Method 1: Use a Magnet

The keylock mechanism for the safes relies on a solenoid. This solenoid can be maneuvered or moved around with a strong magnet. The steps for this method is as follows:

  • Step 1: Find an Adequate Magnet

As we are talking about safes here, the regular magnets that you might have lying around in the house will not work. For the thick walls that safes usually have, you are going to require something powerful as in something that has enough pulling power.

Keeping that in mind, we would recommend you to manage a magnet that has at least 125 pounds of pulling force. Anything lower might not work for this process. You will be able to source one of those in the market, and they will not cost that much too.

  • Step 2: Get Yourself a Sock

Now that you have an adequate magnet with you, you are going to have to find a sock to put that magnet inside. This sock will lower the friction and will allow you to slide it around easily when attached to the door. An old sock that you might have lying around will do the trick.

  • Step 3: Attach the Magnet to the Door

You will have to attach the magnet to the door now. For this, you need to find the corner where the solenoid is placed. For most of the safes, it will be on the top left corner of the door. Attach the magnet there. However, do make sure that you do not get your fingers in between the magnet and the metal, or you can cause yourself serious injury.

  • Step 4: Slide the Magnet Around

Once you have placed the magnet on the corner where the solenoid is, you will have to move it around. While moving it around, you must hold the handle with one hand and pull on it. If the luck is on your side, you can get it unlocked within a matter of seconds.

Method 2: Pick the Lock

Yes, we are asking you to become the protagonist of a movie that you might have seen where that person opens a lock by picking it. However, this method is quite challenging to implement properly, and you are going to need a lot of luck. With that said, here are the steps:

  • Step 1: Choose Something Pointy and Thin

First of all, you will have to choose something that has a pointy tip and will go through the keylock entirely without any restrictions. Examples of such type of stuff could be a thin knife or a flathead screwdriver. In the case of a knife, do makes sure that the width is not that much, or you will not be able to insert it into the hole.

For the screwdriver, pick a small and thinner one. You will also be able to execute this method using a nail file.

  • Step 2: Insert the Knife or Screwdriver Inside

Now that you have got yourself something pointy and thin, which is a screwdriver or a knife in our case, you need to insert it in the keyhole. Slowly make your way through the grooves and insert the knife or the screwdriver all the in. When it is properly inserted, turn it around counterclockwise. If luck is by your side, you will be able to get the door unlocked in moments.

Method 3: Extreme Measures

Well, the methods that we mentioned above might not work for everybody because not all the keylock mechanism are the same. However, the one method that can ensure that the safe gets unlocked is this one.

But do keep in mind that by implementing this method, you will get your safe unusable as in the locking mechanism will not work anymore. It is kind of a last resort. With that said, these are steps that you need to follow for this method:

  • Step 1: Get a Drill

Just like we mentioned, the method is going to be a bit extreme. Keeping that in mind, regular drills are not going to work for this one. What you will have to get is a hammering drill. Get the ones that are quite powerful and will be able to drill through the metal of the locking mechanism.

  • Step 2: Install an Adequately Sized Bit

For the drill bit, we would recommend you go for the largest one that you have with you. The diameter of the drill bit should be as much as the keyhole or larger. Install the bit securely to the head of the drill and make sure that the drill is working optimally. Do make sure to wear protective gear and goggles before drilling a hole into the safe.

Step 3: Drill Through the Keyhole

Now that you have the drill machine prepared, you will have to drill through the keyhole. Drill all the way to the hole. After that, the solenoid will come loose, and you will be able to open the door.

Final Words

Hopefully, we were able to properly show you how to unlock a safe without a key. With that, we would like to concluder here by wishing you good luck and hoping that one of the methods that we mentioned in this article worked for you. Thus, you were able to retrieve your valuable items from the inside.

Leave a Comment