How to Figure out Sentry Safe Combination

Forgot the Combination to Your Safe? Here’s What to Do

As you know by now that safes are the most secure place to keep your valuable items. By keeping them inside a safe, you will not only have to worry about burglars but also you will be able to protect your precious materials from fire accidents if it is fireproof.

Now, what if you forget the combination of the lock for your safe? You might think that you will never be able to retrieve all the materials that you have kept inside.

Well, that is not entirely true. And we are here to show you how to figure out sentry safe combination. Hopefully, by the end of this article, you will be able to gain access back to your locked safe.

Also Read-

Methods for Unlocking a Sentry Safe

Sentry safes are one of the most secure safes among all the types of safes that are out in the market. But everything has a weak point that can be exploited, and the same goes for this secure safe too. So, these are the methods that you should follow to retrieve the items from the safe:

Method 1: Using a Magnet

While this might sound a bit peculiar, but you can almost unlock most of the safes with a strong magnet and some luck. With that said, the steps that you must follow for this method are:

  • Step 1: Get Yourself a Strong Magnet

As you have probably guessed by now that you are going to need a particular type of magnet for this one. Hence, what you have to source is a magnet that has a 125 pounds or 57 kgs of pull force. You will be able to find them in the market easily, and they will not cost that much.

The ones that you want for this are the disc-shaped ones as in the ones that are a bit larger than a hockey puck.

  • Step 2: Put the Magnet in a Sock

Secondly, you will have to get yourself an old sock. This sock will make it easier for you to slide the magnet on top of the safe’s door. However, do ensure that you do not put your fingers in between the magnet and the metal, or you can cause yourself a serious injury.

  • Step 3: Put the Magnet on Top

After you have put the magnet on top of the safe, place it on the corner. The corner that you are looking for the solenoid, which is usually at the top left of the door. By holding it at that position, the solenoid will be triggered.

  • Step 4: Wiggle the Magnet Around

Now, you will have to grab the handle with one hand and grasp the magnet with the other. Slide the magnet that you have placed on the top corner slightly and pull the handle. Move it around for a while and try to open the door. If you are lucky enough, you will be able to get your door unlocked in seconds.

After that, you will be able to not only retrieve the items inside but also be able to reset the combination of the lock.

Method 2: Using a Knife and a Screwdriver

Most of the sentry safes that are out there will also come with a keylock as a backup locking mechanism. If your one has this keylock mechanism, first, you need to try to find that key. It might be in the box that the safe came with.

However, if you can not find it, these are the steps you should follow to bypass the keylock mechanism:

  • Step 1: Find an Adequate Knife or Screwdriver

Not all the knives that you might have lying around will be able to comply with this unlocking task. The adequate ones are the ones that have a pointy tip and is thin and small in size. In other words, the ones that will get into the keyhole are the ones you should pick for this task.

Other than that, if you can not find a knife that can slide into a keyhole, you can opt for a screwdriver. The flathead and thinner ones are the ones that you must look for here.

  • Step 2: Slide the Knife or the Screwdriver in

Now that you have found yourself an adequate knife or screwdriver for the task, you will have to insert it into the keyhole. After you shave inserted the knife or the screwdriver, you need to make it through all the grooves of the keyhole. Once you have done that, you should be able to rotate it around counterclockwise.

Likewise, you might have to try this multiple times to get the knife or the screwdriver inserted completely. Thus, with a bit of luck, you should finally be able to rotate the keylock.

Then, you will be able to get access back to your safe and retrieve all your items. Do not forget to reset the code from the inside once you are in.

Method 3: Extreme Measures

Well, if the luck is not on your side and if you were not able to unlock the door by following the methods that we mentioned above, you are going to have to take extreme measures.

But do remember, you safe might not functional after following this step. Getting the items stored inside is the primary goal for this method. The steps are:

  • Step 1: Find Yourself a Drill

The average drill machines will not cut it for this task. Therefore, you are going to have to find a powerful drill machine. We would recommend you to get the ones that have a hammering functionality built-in because you are going to drill through metal here.

  • Step 2: Drill Through the Handle or the Keyhole

If the safe has a keylock mechanism, it would be best for you to drill through that first. Drill in until you have penetrated the locking mechanism entirely. Once you have done that, the solenoid should get loose, and you should be able to unlock the door.

Now, if you do not have a keylock, you need to drill through the handle. Follow the same procedure as the keylock and loosen up the solenoid. You should be able to unlock the door after drilling all the way through.

Final Words

Hopefully, one of the methods that we included in our article did work for you, and you were able to retrieve your valuable items from the safe finally. With that, we would like to conclude our take on how to figure out sentry safe combination here by wishing you good luck.

Leave a Comment