Unlike the 12 and 20 gauge shells, the .410 cartridges offer a comparatively higher competitive-level performance.
However, buying them in bulk for casual shooting can indeed break your wallet. That is where special equipment such as the reloading presses steps in. Those will enable you to save a lot of money by allowing you to make .410 shells by yourself.
And if you want to make your DIY .410 rounds perform just like the ones that top brands offer, you will need the best .410 reloading press. That is where you are going to face difficulties because of how oversaturated the market is with these.
However, you can stay completely worry-free because we are here to back you up. We will provide you a narrowed-down list, which will hopefully make the choosing process feel as easy as loading your shotgun.
According to us, the MEC 9000GN is the best overall pick. It has an adjustable mechanism that will allow you to easily switch between different rounds.
Also, it boasts an automatic ejector that will make it easier for you to carry out reloading.
On the other hand, we think that the MEC 600 Jr Mark V is also a decent pick if your budget does not allow you to get the MEC 9000GN.
It also has an adjustable swing. Alongside that, it has a quite higher level of efficiency as well.
Table of Contents
- 1 Quick Comparison
- 2 Best .410 Reloading Press Reviews
- 3 Things to Consider Before Buying a .410 Reloading Press
- 4 Conclusion
|1||MEC 9000GN .410 Press||Buy on Amazon|
|2||MEC 600 Jr Mark V 410 Press- 2.5" Shell||Buy on Amazon|
|3||MEC 650N .410 Press||Buy on Amazon|
Best .410 Reloading Press Reviews
To ensure that you do not find yourself in a tricky situation while trying to get one of these for yourself, we have gone through all the popular ones and picked only the ones that we think are recommendation worthy. They are as follows:
1. MAYVILLE ENGINEERING MEC 9000GN .410 Press (Best Pick)
- Fully adjustable offers you full freedom over customizability
- Has smooth indexing on the body, making aligning the shells easier
- The unit is quite efficient, which will allow you to easily reload a large number of shells
- Comes with an automatic ejection mechanism, increasing the efficiency substantially
- Sports a shot change bar, which makes it easier to place the primer
The manufacturer MAYVILLE ENGINEER has been dominating the .410 reloader market with its highly reliable units. And this one that we are going to talk about is not an exception in that reliability factor.
First of all, the unit is highly adjustable, just like most of the manufacturer’s press. You will have the full freedom to change the operational mode.
Also, it does not need much fiddling around for making the operating mode change from low to high shells. In other words, it is pretty easy to operate.
Apart from that, the indexing that it has is smoother than most other units out there. Because of that, you will not have any trouble in the case of making your shells align properly. In fact, you will be able to make them align faster than some of the average press that is out there.
Also, this unit’s efficiency is up to par with the rest of the available high-end models in the market. With just one pull of a handle, you can finish reloading the shells. For that reason, reloading bulk 410 shells will feel like carrying out an effortless task for you.
Alongside that, it also has an automatic ejection mechanism that is hardly any of the average press offers. Because of that, you will not have to manually pull the shells out of the slot once you are done reloading them.
Like some of the manufacturer’s presses, this one does not have the die for changing the gauges. Instead, you will have to rely on the shot change bar that makes the task much easier for you. You can easily set the primer into place because of that bar.
2. MAYVILLE ENGINEERING MEC 600 Jr Mark V 410 Press- 2.5″ Shell (Budget Pick)
- Offers a high level of flexibility, thanks to the adjustability option that it offers
- Features a crimp that will ensure that the shells are in good condition while operating the press
- Has a shot charge bar, which will make it easy for you to put the primer on the station
- Highly efficient, allowing you to finish reloading 400 rounds in just 3 hours
- Boasts a Spandex Camp swivel to make sure you can correctly align the shells
Not that many .410 reloading press in the market can offer you an easy-to-use experience. However, this one that MAYVILLE ENGINEERING is offering resides among the ones that can offer you that.
Unlike most of the single-stage presses, it offers a lot of flexibility. In fact, the adjustability that it can offer makes it stand out the most among all of the other units.
You can quickly make adjustments to it to make it reload shells that are up to three inches.
Aside from that adjustability, the unit also boasts a crimp that implements cam action. It will enable you to make sure that the shells are in adequate condition when you are reloading them.
As a result, you will not have to waste any cartridges while trying to adjust it to the perfect position.
Alongside that, there is a Spandex Camp swivel on the unit. That will enable you to ensure that the shells are appropriately aligned. The shell marks that the swivel has will help you a lot in that procedure too.
Other than that, it does not have any sort of dies. To compensate for that, it has a shot charge bar. That bar is accompanied by three powder bushings.
Because of those two, it will be much easier for you because making the primer seated on the station will be an effortless task.
Besides that, the efficiency of the unit is pretty praiseworthy too. For boasting a high efficiency, you will be able to reload up to four hundred rounds in just 3 hours. Handling a large batch of shells will be super easy.
3. MEC 650N .410 Press
- Sports six different stations that will allow you to quickly finish off your reloading tasks
- Has an auto-indexing mechanism, which will push the rounds from one station to another automatically
- The resizer is easy to change, enabling you to change the operational size quickly
- Features an automatic ejector, making it easier for you to take the rounds out of the slots
- Boasts an automatic feeder, which will speed up your reloading tasks
We will wrap up our review section with yet another press that is in the MEC lineup. If you were looking for something that has an automatic primer feeder, then this is the one for you.
Most of the presses in the market have at best four or five stations. Well, the manufacturer went all out on this one. This one features six individual stations.
That will enable you to work on six shells at a time. So, handling a large number of shells will be an easy task for you.
Apart from that, this progressive press has a fully automatic feeder. That is what makes this one stand out the most. You will not have to rely on the dies or shot changing bar for placing your primer anymore.
The tool will do that automatically for you. As a result, you will be able to reload rounds without having to go through any placement hassles.
Moreover, there is a built-in resizer. That will enable you to finish off your reloading tasks without any interruptions.
It replaces the adjustable swivel that most of the other units have. With that, you will be able to quickly change the operating sizes when you shift to a different type of shell.
Aside from that, it also has the automatic round ejector that most of the advanced units have. You will not have to manually take out the rounds after you have successfully reloaded it because of that ejector.
It will increase your overall efficiency and will allow you to reload a bulk amount quickly.
Lastly, the stations have auto-indexing. That will enable the rounds to move from one station to the other one automatically.
Things to Consider Before Buying a .410 Reloading Press
Before you do decide to spend your valuable money on one of these, you will have to keep some factors in mind.
By keeping those in mind, you are sure to get the right one for your workload type. The factors are:
Just like the standard presses that are for reloading, these are also available in many variants. The most common one is the single-stage ones. Those are pretty easy to operate.
As a result, they are for the ones that are just entering the DIY ammunition scenario. They offer some of the basic functionalities that are more than enough for making rounds by yourself.
The other type of press is the progressives ones. These are a bit advanced than the single-stage units. You would require some time to get used to these if you are a complete newbie.
However, the time that you are going to invest in it would be pretty worth it because of how fast they can be operated. You will be able to go reload a large batch of rounds with them quickly.
Reloading Press Adjustability
The adjustability is an important factor for the .410 reloading presses. If you happen to get one that is not adjustable, you will not be able to easily work with different sizes of rounds.
And you would not generally work with the same size of shell all the time. For that reason, you need to factor in the adjustability of the unit into your mind.
It goes without saying that efficiency is one of the important factors for these mechanical tools. Without a reasonable amount of efficiency, you will not be able to carry out the reloading tasks appropriately.
You might have to go through a lot of hassles. Also, the more efficient the unit will be, the faster you will be able to finish off your reloading tasks.
Pulling the rounds out of the slots manually can be a hassle. Apart from that, it will also slow you down. For that reason, you should consider whether the one that you are shooting for has an automatic ejector or not.
If the unit does have an automatic ejector, it will automatically eject the rounds once the reloading task is finished. As a result, your working efficiency will see a massive increase.
Lastly, you will have to consider the build quality of the units. In this case, you should opt for the ones that are of high-quality materials.
Those will be the most durable. And if the unit is durable, you can expect it to last for an extended amount of time without it showing any performance degradation signs.
We hope that our narrowed down list was efficient enough that after going through it, choosing the best .410 reloading press is now an easy task for you.
With that out of the way, we would like to wrap things up here by hoping that you can succeed in the case of making proper shotgun rounds at a fraction of the retail price.