Best Ways to Store Guns to Prevent Rust

One of the downsides of living in an area where the humidity is relatively high is the things that are of metal and cold steel will eventually catch rust over time. However, moisture is not the only culprit that can cause that, there are a few other factors too.

Now, even if the frame of your firearm is of stainless steel or polymer, it is not entirely immune to rusts. Thus, you would not want the guns that are in your arsenalto be inoperable by rusting over time, would you?

Fortunately, there are some best ways to store guns to prevent rust that are quite straightforward. We are here to introduce them to you.

Also Read-

What Factors Can Make a Gun Rust?

If you are a first-time gun owner, this question might already be running in the back of your mind. Most people think that only if the firearms come in contact with moisture, it will rust, but that is not always the case. The other factors that can make your guns rust are:

Environmental Debris

Any of the foreign substances that can settle on top of a gun or inside one can potentially be corrosive. Moreover, if they go unnoticed, the frame will eventually catch rust and corrode over time.

Improper Handling

With direct contact with the fingertips, you will surely leave some oils on the frame. These will surely make the frame of the firearm corrode and rust over time. We have even seen beautiful handguns that have rusty fingerprints permanently inlaid on the sides.

Ways to Prevent Rust

While there are a plethora of ways that you can implement to keep your firearms safe from rusting, we are not going to go through all of them. In our opinion, these are the ones most straightforward and easy to follow:

Installing a Heating Rod

If you have got yourself a gun safe and are planning to store weapons in it, you can install a heating rod inside it. This heating rod will prevent moisture from accumulating inside, which will eventually keep your firearms safe from rust.

On the other hand, if you can not opt for a commercial-grade heating rod, you can make one by yourself. You can just simply install a holder inside the safe and attach a bulb to it.

However, you should be a little careful when handling the firearms inside if you have a bulb installed, else you might break it or touch it and get yourself a burn mark.


If you are in the lookout for a non-electric option, you can opt for the dehumidifiers that are out in the market. The most common ones are silica gel beads. These come in a small package and will be able to absorb moisture from the surrounding.

Accordingly, you will have to check frequently whether the absorbing capacity of the gels are at the maximum level or not. When it is, they will change their color, which is usually green.

Regular Maintenance

Taking care of precious firearms regularly goes a long way in the case of preventing rust. Keeping this in mind, you can check on the guns that you stored once or twice a week. Wipe it clean using a microfiber cloth and make sure that you do not leave any fingerprint grease on the frame.

As you know by now, oils from the fingers can make the frame corrode. Well, for handling the guns around safely, you can opt for the rubber hand gloves that are out in the market. By wearing them, you are going to make sure that the oils of your skin do not come in contact with the frame of the gun.

Use Silicone Impregnated Gun Socks

There is a special type of storage bag in the market that are known as silicone gun socks. These come with silicone coating on the inside. Thus, this coating will ensure that the frame does not come in contact with any sort of moisture.

After getting one of these, you will have to clean your gun adequately first. Use a silicone or microfiber gun cloth and make sure there is no dust, debris, or oil on the frame. Likewise, wrap the frame with the sock and store it.

Coat Them With Rust Prevent Oils or Agents

This one is the traditional way of keeping your firearms safe from oxidation. You probably have heard about cosmoline, which is also known as a petroleum-based rust inhibitor. Coating the frame with this before storing will keep the metal equipment safe from catching rust.

So, no matter how much humid the air might have, this agent will be able to withstand it. Nevertheless, there is a downside to this.

You will have to wipe away all the gunky substance from the surface before you plan to use it, which can be a bit tedious. Hence, if you have a lot of time and patience, we would recommend you to opt for this one.

Vacuum Sealing

Another time consuming storing process for preventing rust is to vacuum seal the weapons. Usually, there are two ways of vacuum sealing. One is to use airtight zippers, and the other one is to heat seal.

Airtight zippers that are in the market can usually accommodate small firearms such as pistols or handguns and PDWs. However, you will be able to find the ones that are for rifles. These will usually have a one-way valve, which will make the enclosure airtight.

Other than that, the heat sealing option that we talked about can be another way of storing the units in a vacuum seal. You probably have a heat sealer in your kitchen, which you will be able to use for this process.

Final Words

Implementing one of the best ways to store guns to prevent rust will extend the overall lifespan of the firearm and make it operate at an optimal level throughout its lifespan. With that, we would like to conclude here by wishing you good luck and hoping that your firearms function optimally for an extended amount of time.

Leave a Comment